WP DS Levell Dichtspachtel
WP DS Levell Dichtspachtel
0 Reviews | Add review

Contents: 10 liter (7-16 m²) Proven effect Funcosil SNL:  >10 year. Property profile Funcosil SNL For hydrophobizing impregnation of porous, cementitious building materials such as brick and cl...

Product number

042625 

Weight   

0,000 KG

Shipping costs

€ 0,00 

€ 83,50
Price per unit

 

Quantity: 
Order
Add to wishlist
 

| More

Do you have a question about this product?

Ask us your question

Contents: 10 liter (7-16 m²)

Proven effect Funcosil SNL:  >10 year.


Property profile Funcosil SNL

  • For hydrophobizing impregnation of porous, cementitious building materials such as brick and clinker masonry work, fair-faced sand-lime brick masonry work, cementitious renders, fibrated cement, aerated concrete, light-weight concrete and modular concrete blocks, natural stone. Can also be used on surfaces already hydrophobized.

Directions for application of Funcosil SNL
The Funcosil SNL is applied under gravity in a flow coating procedure generously enough that a 30-50 cm long film of liquid runs down the building material. The nozzle should be held horizontally and led along the facade without interruption. After the Funcosil SNL has been absorbed, the process is repeated several times. Spraying pressure and nozzle diameter should be selected so that misting does not occur. To avoid missing areas, limited sections should be completely impregnated without interruption. A brush or roller can be used for smaller, complicated surfaces that do not allow a spray application. In this case, the required application rate can only be achieved by working with well saturated tools. Protect the freshly impregnated surface from driving rain for at least 5 hours. Strong wind and sunlight may accelerate evaporation of the carrier which has a negative influence on penetration depth. The surface of less absorbent substrates should be washed off with V 101 Thinner half an hour to an hour after application to remove excess material which could create a gloss. Working temperature: Water repelling impregnation is preferably carried out at temperatures between +10 °C and +25 °C. Sun awnings can be used to prevent surfaces from heating too strongly. At temperatures below 10 °C, evaporation of the carrier and formation of the active ingredient may be considerably delayed.

Application rate Funcosil SNL
Brick masonry work, fine-pored: At least 0.8 l/m²
Brick masonry work, coarse-pored: At least 1.0 l/m²
Sand-lime brick, smooth: At least 0.5 l/m²
Sand-lime brick, cleft, bossed: At least 0.7 l/m²
Render: At least 0.5 l/m²
Aerated concrete: At least 1.0 l/m²
Fibrated cement: At least 0.3 l/m²
Modular concrete blocks: At least 1.2 l/m²

 
 

Add review

Review must be approved by an administrator before being posted.

No reviews found.

Ask a question about this product

Fields marked with a * are mandatory

Your question has been sent! Thank you.

We will provide you with an answer as soon as possible.

 

Impregnationoutlet Open


Dear visitor,

As you have noticed the Corona virus has affected public life and made many webshops suspend activities. Even though the health of our employees is of paramount importance we have decided to stay open, and to even increase our service levels. 
Due to busy times at our couriers, it can happen that your order arrives one day later than you were used to. 

Our team will be pleased to be of assistance for technical and commercial support.  

With best regards,
The Impregnationoutlet Team