Contents: 550 ml
Property profile Kiesol C
Kiesol C is an aqueous, solventfree injection cream with an active ingredient content of 80%.
- Ready to use
- Silane based, solvent-free
- Very high yielding, low application rate
- Optimised for application under gravity
- Easy, fast and reliable
- Suitable for a high degree of moisture saturation
- Application rates can be easily calculated
- WTA cerificates available
Processing Kiesol C
Surface preparation
If present, remove old plaster layer at least 80 cm more than the visible moisture-salt damage limit. Remove bad, affected joints 2 cm deep. Seal open joints with Remmers Grundputz. Treat walls up to 30 cm above the injection zone or above ground level with Remmers sulfatex mortar from the Kiesol system (mineral seal with depth effect).
Adjacent parts
Building parts and/or materials that should not come into contact with the impregnating agent (e.g. glass, painted or parts yet to be painted) must be properly protected, just like plants (e.g. by covering them with construction film).
Drill holes
Take a 12mm diameter drill and drill holes in one row with a distance between holes of 12cm, horizontally in the wall. Drill hole depth up to approx. 2 cm before end wall thickness. Walls, thickness > 0.6 m, drill from both sides if necessary. Example: with a wall thickness of 20 cm, the borehole is 18 cm deep. Before filling the holes, completely remove the drilling dust.
Injection
Kiesol C is injected or applied into the masonry via the drill holes. The boreholes are usually placed just above ground level on the outside or at the height of the plinth inside. Press the spray lance, adapted to the diameter of the drilled holes, as deeply as possible into the drilled hole. The borehole must be completely filled by allowing the Kiesol C to flow out very slowly and simultaneously withdrawing the spray lance. A regular low-pressure weed sprayer with a straight lance can also be used for this.
Application is still possible at a moisture content of approximately 95%. To prevent evaporation of the effective active substance from the boreholes, they must be closed as soon as possible with Remmers WP DS Levell (item no. 042625).
Example consumption per linear meter (1 m1)
Wall thickness 10 cm: 90 - 130 ml
Wall thickness 20 cm: 200 - 250 ml
Wall thickness 30 cm: 320 - 360 ml
Wall thickness 50 cm: 540 - 500 ml
Frequently asked question: what is the difference with Kiesol C+?
Kiesol C is a successful and proven product. Kiesol C+ accelerates the reaction time with the substrate. This means that horizontal sealing is achieved more quickly with C+.