Nieuwste producten van Imprägnieroutlet, Remmers Fassaden Imprägnierung mit Tiefstpreisgarantie.

Funcosil SNW (30 liter)

Tue, 07 Jul 2026 09:49:34 +0000

Funcosil SNW 30 Liter (identical to Funcosil WS, Funcosil SNL Ultra) – Professional High-Performance Facade Water Repellent

The Funcosil SNW 30 liter is a premium facade impregnation solution made with silane/siloxane technology. This colorless protective treatment penetrates deeply into porous surfaces, making them permanently water-repellent while maintaining breathability. Its large 30-liter packaging makes it ideal for medium to large facade projects, offering efficiency and long-lasting protection.

Active ingredient content: 10%

Key Benefits

Protection against driving rain
Reduces dirt and algae growth
Breathable and vapor-permeable
Deep penetration with long-lasting effects
Improves frost and de-icing salt resistance
UV- and alkali-resistant
Solvent-free, odorless, PFAS-free
Helps reduce energy loss

Applications

Funcosil SNW is suitable for porous, mineral substrates, including:

Brick
Sand-lime brick (KS brick)
Mineral plaster
Aerated concrete
Natural stone
Mineral-based insulated facade systems (ETICS/WDVS)

It is also perfect for renovation, maintenance, and restoring existing hydrophobic layers.

Coverage per Substrate

The required amount depends on the porosity and absorption of the surface. Approximate coverage:

Fine-pored brick: 0.8 L/m² (≈37 m² per 30 L)
Coarse-pored brick: 1.2 L/m² (≈25 m² per 30 L)
Smooth sand-lime brick: 0.7 L/m² (≈43 m² per 30 L)
Rough sand-lime brick: 0.8 L/m² (≈37 m² per 30 L)
Aerated concrete: 1.0 L/m² (≈30 m² per 30 L)
Fine-pored natural stone: 0.8 L/m² (≈37 m² per 30 L)
Coarse-pored natural stone: 1.7 L/m² (≈18 m² per 30 L)

Average yield is approximately 25–40 m² per 30 liters. For precise results, test a small area of 1–2 m² first.

How It Works

Funcosil SNW penetrates deeply into surface pores and creates a hydrophobic barrier. Rainwater is repelled while allowing water vapor to escape, preventing moisture problems, dirt accumulation, and frost damage. This extends the life and appearance of your facade.

Application Instructions

Apply by flooding (low-pressure; do not spray)
Work from top to bottom
Apply multiple wet-on-wet layers
Finish with a block brush
Ideal application temperature: +10°C to +25°C

The surface must be clean, dry, and structurally sound. Repair cracks or defects beforehand.

Storage & Shelf Life

Minimum shelf life: 12 months
Store in a cool, dry, frost-free environment
Use opened containers promptly

Important Notes

Not suitable for polystyrene or bitumen
Protect treated surfaces from weather during application
Always test on a small sample area first
For salt-containing substrates, conduct prior analysis

Summary

Funcosil SNW 30 liter is a professional, durable solution for water-repellent facades. With deep penetration and high efficiency, it protects your exterior surfaces from moisture, dirt, and weathering for years.

Funcosil SNW, Funcosil WS and Funcosil SNL (Ultra) – International Naming and Interchangeability

Funcosil SNW is marketed by the manufacturer under different product names, including:

Funcosil SNW
Funcosil WS
Funcosil SNL (Ultra)

These different names refer to the same product, with identical composition, technical characteristics, and performance.

It is a colorless, water-repellent impregnating agent based on silane/siloxane technology, supplied as a water-based emulsion with an active ingredient content of 10%.

The naming differences are purely commercial and are used to align the product with different product ranges, branding strategies, or market positioning requirements. Regardless of the name used, Funcosil SNW, Funcosil WS and Funcosil SNL (Ultra) are technically identical and can be considered fully interchangeable.

Funcosil SNW (5 liter)

Tue, 07 Jul 2026 09:47:50 +0000

Funcosil SNW 5 liters (identical to Funcosil WS, Funcosil SNL Ultra) – Professional facade impregnation with high efficiency

Funcosil SNW 5 liters is a high-quality facade impregnation based on silane/siloxane. This colorless facade protector penetrates deeply into the substrate and makes it permanently water-repellent without blocking breathability.

Thanks to the handy 5-liter packaging, this product is ideal for small to medium facade projects.

Active ingredient content: 10%

Key benefits

✔ Protection against driving rain
✔ Reduced dirt and algae growth
✔ Breathable and vapor permeable
✔ Deep penetration and long service life
✔ Improves frost and de-icing salt resistance
✔ UV and alkali resistant
✔ Solvent-free, odorless and PFAS-free
✔ Helps reduce energy loss

Applications

Suitable for porous, mineral substrates such as:

Brick
Calcium silicate brick
Mineral plaster
Aerated concrete
Natural stone
ETICS systems with mineral top layers

Also ideal for renovation, maintenance, and restoring existing hydrophobic layers.

Consumption per substrate

Consumption depends on substrate absorption and porosity:

Fine brick: approx. 0.8 l/m² (± 6 m² per 5 liters)
Coarse brick: approx. 1.2 l/m² (± 4 m² per 5 liters)
Smooth calcium silicate: approx. 0.7 l/m² (± 7 m² per 5 liters)
Rough calcium silicate: approx. 0.8 l/m² (± 6 m² per 5 liters)
Aerated concrete: approx. 1.0 l/m² (± 5 m² per 5 liters)
Fine natural stone: approx. 0.8 l/m² (± 6 m² per 5 liters)
Coarse natural stone: approx. 1.7 l/m² (± 3 m² per 5 liters)

Average coverage: approx. 4–7 m² per 5 liters
Always test on a 1–2 m² sample area.

Function

Funcosil SNW penetrates deep into the pores and makes the substrate hydrophobic. Rainwater is repelled while water vapor escapes. Prevents moisture problems, dirt, and frost damage, extending facade lifespan.

Application

Apply by flooding (low pressure, do not spray)
Work from top to bottom
Apply several times wet-on-wet
Post-treat with a block brush
Application temperature: +10°C to +25°C

Substrate must be clean, dry, and load-bearing. Repair cracks or defects beforehand.

Storage & Shelf life

Minimum 12 months shelf life
Store cool, dry, and frost-free
Opened packaging should be used quickly

Important notes

Not suitable for polystyrene or bitumen
Protect treated surfaces from weather exposure
Always apply a test area first
For salt-containing substrates, conduct an analysis first

Summary

The Funcosil SNW 5 liters is a durable, professional solution for water-repellent facades. With high efficiency and deep penetration, it protects your facade long-term against moisture, dirt, and weather damage.

Funcosil SNW, Funcosil WS and Funcosil SNL (Ultra) – International Naming and Interchangeability

Funcosil SNW is marketed by the manufacturer under different product names, including:

Funcosil SNW
Funcosil WS
Funcosil SNL (Ultra)

These different names refer to the same product, with identical composition, technical characteristics, and performance.

It is a colorless, water-repellent impregnating agent based on silane/siloxane technology, supplied as a water-based emulsion with an active ingredient content of 10%.

Funcosil SNW (10 liter)

Tue, 07 Jul 2026 09:46:22 +0000

Funcosil SNW 10 Litres – Professional Masonry Water Repellent for Long-Lasting Façade Protection

The Funcosil SNW 10 litre is a high-quality façade impregnation based on silane/siloxane technology. This colourless masonry water repellent penetrates deeply into porous mineral substrates, providing long-lasting water repellency while maintaining the natural breathability of the building material.

The practical 10 litre container is ideal for small to medium-sized façade projects, renovation work, maintenance and residential applications.

Active ingredient content: 10%

Key Benefits

Long-lasting protection against driving rain and moisture penetration
Reduces dirt accumulation, algae and moss growth
Vapour permeable and breathable
Deep penetration for durable protection
Improves frost and de-icing salt resistance
UV-resistant and alkali-resistant
Solvent-free, odourless and PFAS-free
Helps reduce heat loss caused by damp masonry

Suitable Applications

Funcosil SNW is suitable for a wide range of porous mineral substrates, including:

Clay brick
Calcium silicate brick
Mineral render
Aerated concrete
Natural stone
External Thermal Insulation Composite Systems (ETICS) with mineral finishes

Also ideal for:

Façade renovation
Preventive maintenance
Restoring existing hydrophobic treatments

Coverage

Consumption depends on the absorbency and porosity of the substrate.

Fine porous brick: approximately 0.8 litres per m² (about 12 m² per 10 litres)
Coarse porous brick: approximately 1.2 litres per m² (about 8 m² per 10 litres)
Smooth calcium silicate brick: approximately 0.7 litres per m² (about 14 m² per 10 litres)
Rough calcium silicate brick: approximately 0.8 litres per m² (about 12 m² per 10 litres)
Aerated concrete: approximately 1.0 litre per m² (about 10 m² per 10 litres)
Fine porous natural stone: approximately 0.8 litres per m² (about 12 m² per 10 litres)
Coarse porous natural stone: approximately 1.7 litres per m² (about 6 m² per 10 litres)

Average coverage: approximately 8–14 m² per 10 litres.

A test area of 1–2 m² is always recommended to determine the exact consumption.

How It Works

Funcosil SNW penetrates deeply into the pores of the substrate, creating a durable hydrophobic barrier. Rainwater is repelled while water vapour can continue to escape from the wall.

This helps prevent moisture-related problems, dirt accumulation, algae growth and frost damage while extending the service life of the façade.

Application

For the best results:

Apply using a flooding method with low pressure (do not spray as a mist)
Work from the top down
Apply multiple wet-on-wet coats
Even out excess material using a masonry brush
Apply between +10°C and +25°C

The substrate must be clean, dry, sound and free from dust. Repair cracks and defects before application.

Storage and Shelf Life

Minimum shelf life of 12 months
Store in a cool, dry and frost-free place
Use opened containers as soon as possible

Important Notes

Not suitable for polystyrene or bituminous substrates
Protect treated surfaces from rain during curing
Always carry out a test application first
Salt-contaminated substrates should be assessed before treatment

Funcosil SNW, Funcosil WS and Funcosil SNL (Ultra): Different Names, Identical Product

Depending on the market, this impregnation is sold under different product names:

Funcosil SNW
Funcosil WS
Funcosil SNL (Ultra)

These names refer to exactly the same product with identical composition and performance.

All versions are water-based silane/siloxane emulsions with an active ingredient content of 10%, offering deep penetration, excellent water repellency and vapour permeability.

The different product names are used solely for commercial and regional marketing purposes. Funcosil SNW, Funcosil WS and Funcosil SNL (Ultra) are technically identical and fully interchangeable.

Summary

Funcosil SNW 10 litre is a professional water-based masonry water repellent designed to provide long-lasting protection against moisture, driving rain, dirt and frost damage. Its deep penetration and breathable hydrophobic technology help keep façades dry, clean and durable.

With an average coverage of 8–14 m² per 10 litre container, it is an excellent choice for smaller façade projects, renovation work and routine maintenance.

WP DS Levell Sealing Mortar (25 kg)

Tue, 08 Jan 2019 12:20:45 +0000

Contents: 10 liter (7-16 m²)

Proven effect Funcosil SNL: >10 year.

Property profile Funcosil SNL

For hydrophobizing impregnation of porous, cementitious building materials such as brick and clinker masonry work, fair-faced sand-lime brick masonry work, cementitious renders, fibrated cement, aerated concrete, light-weight concrete and modular concrete blocks, natural stone. Can also be used on surfaces already hydrophobized.

Directions for application of Funcosil SNL
The Funcosil SNL is applied under gravity in a flow coating procedure generously enough that a 30-50 cm long film of liquid runs down the building material. The nozzle should be held horizontally and led along the facade without interruption. After the Funcosil SNL has been absorbed, the process is repeated several times. Spraying pressure and nozzle diameter should be selected so that misting does not occur. To avoid missing areas, limited sections should be completely impregnated without interruption. A brush or roller can be used for smaller, complicated surfaces that do not allow a spray application. In this case, the required application rate can only be achieved by working with well saturated tools. Protect the freshly impregnated surface from driving rain for at least 5 hours. Strong wind and sunlight may accelerate evaporation of the carrier which has a negative influence on penetration depth. The surface of less absorbent substrates should be washed off with V 101 Thinner half an hour to an hour after application to remove excess material which could create a gloss. Working temperature: Water repelling impregnation is preferably carried out at temperatures between +10 °C and +25 °C. Sun awnings can be used to prevent surfaces from heating too strongly. At temperatures below 10 °C, evaporation of the carrier and formation of the active ingredient may be considerably delayed.

Application rate Funcosil SNL
Brick masonry work, fine-pored: At least 0.8 l/m²
Brick masonry work, coarse-pored: At least 1.0 l/m²
Sand-lime brick, smooth: At least 0.5 l/m²
Sand-lime brick, cleft, bossed: At least 0.7 l/m²
Render: At least 0.5 l/m²
Aerated concrete: At least 1.0 l/m²
Fibrated cement: At least 0.3 l/m²
Modular concrete blocks: At least 1.2 l/m²

Remmers Funcosil FC impregnation cream 40% active ingredient (12,5 liter)

Mon, 17 Sep 2018 18:54:17 +0000

Contents: 12,5 liter (60 - 85 m²)

Proven effect Funcosil FC: >15 year.
Shelf life: minimum 12 months

Property profile

For hydrophobizing impregnation of porous, cementitious building materials such as brick, clinker, sand-lime brick, render, natural stone and fibrated cement. Rain tight: approx. 30 min. after application. Not sensitive to frost. Not suitable for dense building materials such as marble, granite or cleaving tiles.

Directions
Funcosil FC is applied by roller (long-haired lambskin roller), brush or airless equipment. Depending on the absorbency of the substrate, application rates of up to 0.2 l/m² can be applied in one working operation even on vertical surfaces and ceilings without a loss of material. Working temperature: Hydrophobizing impregnation is preferably carried out at temperatures between +5 °C and 25 °C. Sun awnings can be used to prevent surfaces from heating too strongly. At temperatures below 10 °C, evaporation of the carrier and formation of the active ingredient may be considerably delayed. Rain tight: At the earliest after 60 minutes or after the cream has been completely absorbed.

Application rate
Depending on porosity approx. 0.15 to 0.20 l/m². Impregnation agent requirements for calculation and tender should be determined on a sufficiently large trial area (1- 2 m²). The effectiveness of the impregnation can also be checked on this surface.

Injection cream 80 (12,5 liter)

Tue, 03 Apr 2018 17:50:01 +0000

Contents: 12,5 Liter

Property profile
Remmers Injection Cream 80 is an solventfree, aqueous, injection cream with an high active ingredient content of 80%.

Ready to use
Silane based, solvent-free
Very high yielding, low application rate
Optimised for application under gravity
Easy, fast and reliable
Suitable for a high degree of moisture saturation
Application rates can be easily calculated

Processing Injection Cream 80

Surface preparation
If present, remove old plaster layer at least 80 cm more than the visible moisture-salt damage limit. Remove bad, affected joints 2 cm deep. Seal open joints with Remmers Grundputz. Treat walls up to 30 cm above the injection zone or above ground level with Remmers sulfatex mortar from the Kiesol system (mineral seal with depth effect).

Adjacent parts
Building parts and/or materials that should not come into contact with the impregnating agent (e.g. glass, painted or parts yet to be painted) must be properly protected, just like plants (e.g. by covering them with construction film).

Drill holes
Take a 12mm diameter drill and drill holes in one row with a distance between holes of 12cm, horizontally in the wall. Drill hole depth up to approx. 2 cm before end wall thickness. Walls, thickness > 0.6 m, drill from both sides if necessary. Example: with a wall thickness of 20 cm, the borehole is 18 cm deep. Before filling the holes, completely remove the drilling dust.

Injection
Injection Cream 80 is injected or applied into the masonry through the drill holes. The boreholes are usually placed just above ground level on the outside or at the height of the plinth inside. Press the spray lance, adapted to the diameter of the drilled holes, as deeply as possible into the drilled hole. The drill hole must be completely filled by allowing the Kiesol C to flow out very slowly and simultaneously withdrawing the spray lance. A regular low-pressure weed sprayer with a straight lance can also be used for this.
The application is still possible at a moisture content of approximately 95%. To prevent evaporation of the effective active substance from the boreholes, they must be closed as soon as possible with Remmers WP DS Levell (item no. 042625).

Example consumption per linear meter (1 m¹)

Wall thickness 10 cm: 90 - 130 ml
Wall thickness 20 cm: 200 - 250 ml
Wall thickness 30 cm: 320 - 360 ml
Wall thickness 50 cm: 540 - 500 ml

Frequently asked question: what is the difference between Kiesol C and Kiesol C+?
Injection Cream 80 is virtually identical to Kiesol C and both have 80% active ingredient. However, InjectionCream 80 does not have the certificates that Kiesol C's business processors need for their projects, but is therefore cheaper.
Kiesol C+ accelerates the reaction time with the substrate. This means that horizontal sealing is achieved more quickly with C+.

Injection cream 80 (5 liter)

Tue, 03 Apr 2018 17:25:36 +0000

Contents: 5 Liter

Property profile
Remmers Injection Cream 80 is an solventfree, aqueous, injection cream with an high active ingredient content of 80%.

Ready to use
Silane based, solvent-free
Very high yielding, low application rate
Optimised for application under gravity
Easy, fast and reliable
Suitable for a high degree of moisture saturation
Application rates can be easily calculated

Wall thickness 10 cm: 90 - 130 ml
Wall thickness 20 cm: 200 - 250 ml
Wall thickness 30 cm: 320 - 360 ml
Wall thickness 50 cm: 540 - 500 ml

Remmers Funcosil FC cream 40% active ingredient (0,75 liter)

Thu, 27 Apr 2017 18:34:00 +0000

Contents: 0,75 liter (3,5 - 5 m²)

Proven effect Funcosil FC: >15 year.

Property profile

For hydrophobizing impregnation of porous, cementitious building materials such as brick, clinker, sand-lime brick, render, natural stone and fibrated cement. Rain tight: approx. 30 min. after application. Not sensitive to frost. Not suitable for dense building materials such as marble, granite or cleaving tiles.

MB 2K (previously Multi-Tight 2K) - 8,3 kg

Sat, 17 Dec 2016 17:59:36 +0000

Contents: 8,3 kg.

Water impermeability: up to a 10 m water column.

Range of use:

For fast waterproofing of building elements, tanks, reservoirs and Basements
Against ground damp, non-standing seepage water, in wet rooms, standing seepage water and external water pressure in accordance with DIN 18195
Waterproofing in and under walls as a horizontal barrier against rising damp in masonry work
Waterproofing the contact area beneath facing masonry and clinker wall positioning Areas
Waterproofing in a bond with tiles and slab covers, indoors and outdoors (load class A0/B0
) Internal waterproofing according to the WTA Code of Practice 4-6
For attaching perimeter insulation Panels
Plinth waterproofing when com-bined with plinth render and bonded thermal insulation Systems
Render waterproofing
Flat roof waterproofing with a low vapour pressure gradient over rooms that are not heated / not inhabited, e.g. garages

Property profile:

Remmers Multi-Tight 2K is liquid, polymer thick coating that com-bines the properties of a flexible, mineral waterproofing grout (MWG) and a polymer modified bitumen thick coating (PMBC): Solvent-free
Low emissions
Bitumen-free
Highly flexible and crack-bridging
Fast thorough drying and cross-linking after just 18 hours
Can be applied as a grout, filler or sprayed
High compressive strength
Quickly water pressure tight, 1 bar after 18h
Rain tight after approx. 2 hours
Water pressure tight without a layer of reinforcement
Visible control of thorough drying
High tensile adhesion strength on mineral substrates and old bitumen
Can be used on vertical and horizontal surfaces as well as beneath screeds
Can be coated over
UV resistant
Resistant to de-icing salt
Frost and age resistant
Can be quickly subjected to foot traffic and covered (≥ 4h)

Directions
Shake the liquid component well before using. The powder component is added to the liquid component. Remove material that adheres to the side of the bucket with a trowel and mix with a suitable mixing tool until homogeneous, lump-free and the proper consistence for application with a brush or filling knife has been achieved. Mixing time is approx. 3 minutes. If required, smaller quantities can also be mixed in a ratio of 1 part by weight liquid to 1.36 parts by weight powder. The mixing ratio should not be changed. The subsequent working operations are executed as described under Applications in a brushing or filling procedure. The maximum total wet layer thickness should not exceed 5 mm. Do not use if the temperature of the air, substrate or building material is below +5 °C or above +30 °C. Relative humidity should not exceed 95%. Do not use in direct sunlight; observe the rules for the application of render according to the position the sun, remaining in the shade (pre-wet surfaces that are strongly heated) or work in the morning or evening hours. The waterproofing is sensitive to rain and frost in the fresh state.

Application rate
1 mm thickness: 2,5 kg per m2
2 mm thickness: 3,7 kg per m2

Kiesol C (10 liter)

Tue, 09 Aug 2016 21:06:32 +0000

Contents: 10 Liter

Property profile Kiesol C
Kiesol C is an aqueous, solventfree injection cream with an active ingredient content of 80%.

Ready to use
Silane based, solvent-free
Very high yielding, low application rate
Optimised for application under gravity
Easy, fast and reliable
Suitable for a high degree of moisture saturation
Application rates can be easily calculated
WTA cerificates available

Processing Kiesol C

Surface preparation
If present, remove old plaster layer at least 80 cm more than the visible moisture-salt damage limit. Remove bad, affected joints 2 cm deep. Seal open joints with Remmers Grundputz. Treat walls up to 30 cm above the injection zone or above ground level with Remmers sulfatex mortar from the Kiesol system (mineral seal with depth effect).

Adjacent parts
Building parts and/or materials that should not come into contact with the impregnating agent (e.g. glass, painted or parts yet to be painted) must be properly protected, just like plants (e.g. by covering them with construction film).

Drill holes
Take a 12mm diameter drill and drill holes in one row with a distance between holes of 12cm, horizontally in the wall. Drill hole depth up to approx. 2 cm before end wall thickness. Walls, thickness > 0.6 m, drill from both sides if necessary. Example: with a wall thickness of 20 cm, the borehole is 18 cm deep. Before filling the holes, completely remove the drilling dust.

Injection
Kiesol C is injected or applied into the masonry via the drill holes. The boreholes are usually placed just above ground level on the outside or at the height of the plinth inside. Press the spray lance, adapted to the diameter of the drilled holes, as deeply as possible into the drilled hole. The borehole must be completely filled by allowing the Kiesol C to flow out very slowly and simultaneously withdrawing the spray lance. A regular low-pressure weed sprayer with a straight lance can also be used for this.
Application is still possible at a moisture content of approximately 95%. To prevent evaporation of the effective active substance from the boreholes, they must be closed as soon as possible with Remmers WP DS Levell (item no. 042625).

Example consumption per linear meter (1 m1)
Wall thickness 10 cm: 90 - 130 ml
Wall thickness 20 cm: 200 - 250 ml
Wall thickness 30 cm: 320 - 360 ml
Wall thickness 50 cm: 540 - 500 ml

Frequently asked question: what is the difference with Kiesol C+?
Kiesol C is a successful and proven product. Kiesol C+ accelerates the reaction time with the substrate. This means that horizontal sealing is achieved more quickly with C+.

KSE 300 Stone strengthener (30 liter)

Mon, 25 Jul 2016 11:19:40 +0000

Contents: 30 liter

Range of use
Remmers KSE 300 can be used to strengthen medium pored, absorbent and friable mineral building materials, preferably sandstone. It can also be used to strengthen historical renders and joints. Stone with pronounced swelling and shrinking properties caused by swelling capable clay materials should be pre-treated with Remmers Antihygro (Art. No. 0616) to reduce swelling. The stone should be examined in Remmers' laboratory.

Property Profile
Property profile Remmers KSE 300 reacts with water stored in the pore system or humidity. During this reaction, amorphous and hydrous silicon dioxide (SiO2,aq, "silica gel") is deposited as a binder. The mineral silica gel binder thus replaces the original binder lost through weathering. The speed of the gel deposit reaction is very dependent on temperature and humidity. Under normal conditions (20 °C, 50 % relative humidity), the deposit of binder is concluded after approx. 3 weeks.

In the following, the most important property parameters of Remmers KSE 300 are given: 

Gel deposit rate approx. 30 % 
Single component system – no errors, easy to use 
Neutral catalyst 
Great penetration depth, possible all the way down to the sound core of the stone material 
No by-products that damage the building 
High weathering resistance and UV stability 
Partially strengthened natural stone can be worked over with Remmers Restoration Mortar

Clean FP (previously Facade cleaner paste) - 5 kg

Mon, 11 Jul 2016 05:56:17 +0000

Contents: 5 kg

Property profile Clean FP
Remmers Clean FP facade cleaner paste is suitable for all facade surfaces made of clinker, brick and natural stone as well as for sculptures. It is not suitable for fair-faced masonry work made of sand-lime brick. It does not dissolve the remains of mortar.

Facade Cleaner Paste is a ready to use, slightly acidic, thixotropic facade cleaner paste for clinker, brick and natural stone surfaces. Since the paste is not highly acidic, there is very little loss of substance. Dark types of stone may become lighter in colour if the paste is left on the stone for a long time. Because of its thixotropic formulation, it can be applied cleanly and efficiently and the material does not run.

Directions Clean FP
Before using, a trial surface should always be set up first on an inconspicuous place. Apply Clean FP cleaner paste to the dry facade to be cleaned with a wide brush or lambskin roller. Allow to act for 2-5 minutes; do not allow to dry. Do not pre-wet the facade surface! Rinse off thoroughly with plenty of water under pressure (high pressure cleaner). When there are deeper lying joints, clean these areas especially thoroughly. Areas with stubborn soiling can be scrubbed with a brush (before rinsing off with water). After rinsing there should be no residue in deeper lying areas.
Working temperature: Between +5 °C and + 30°C.

Application rate Clean FP
Depending on the degree of soiling, at least 0.1 gk/m²

Kiesol (5 kg)

Mon, 13 Jun 2016 18:44:29 +0000

Contents: 5 kg

Range of use

Kiesol is a liquid combination product made of water repelling silicic acid compounds
Water repelling, capillary narrowing, deep protection for waterproofing damp masonry work
Protection against capillary rising damp through injection with Kiesol in a borehole procedure
Diffusion open barrier zone (deep protection) against the effect of moisture from behind
Improved adhesion by priming, diluted 1:1 with water
Strengthens the substrate and increases chemical resistance through silicification
Faster working operations through silicification treatments with waterproofing grouts (system waterproofing in one day)
As a solvent-free, highly concentrated system component, Kiesol is environment-friendly and is thus also suitable for indoor applications
Suppresses capillary water absorption according to WTA, tested up to a degree of 80% moisture penetration by injecting under gravity.

Directions
I. Refurbishment of old buildings: a) Borehole procedure "Injection of Masonry Work against Capillary Rising Damp" in ground floors and basements: Remove render and/or coatings at least 80 cm above the moist edge. Chase out damaged mortar joints up to 2 cm deep. Pre-wet dry areas and apply a silicification treatment consisting of Kiesol diluted 1:1 with water and Remmers Sulfatex Grout. Then close open joints with Remmers Waterproofing Filler. To inject masonry work in a borehole procedure against capillary rising damp, drill holes in intervals of 10-12.5 cm with a downward slope of approx. 25°, less for thicker walls and more for narrower walls. Depending on the procedure used, the diameter of the boreholes should be 10 to 30 mm. When drilling the holes, cross at least one horizontal joint, ending approx. 5 cm before the end of the wall.

Fill hollow masonry, e.g. double leaf cavity masonry with a loose core filling, narrow cracks, etc., with Remmers Injection Mortar first. At the earliest after 7 days (the Injection Mortar must have hardened), these boreholes are redrilled. In the case of extremely hollow masonry work, it is also possible to fill one row of boreholes with Injection Mortar first and then to inject with Kiesol 5 cm higher. Injection is made under gravity through suitable storage containers, e.g. for narrow walls up to 24 cm thick with an injection cartridge, otherwise with feeding devices, until the surrounding wall area is saturated. When a low pressure procedure is used (approx. 4-8 bar), light pressure injection packers or plastic packers are used: Injection equipment: Kiesol Surface Sprayer with coupling, Hübner Airless 1301 VP or Desoi Injection Pump DEMb03, Dittman Unipress.
Guide values for impregnation time with Kiesol:
30 sec. approx. 0.25 kg
1 min. approx. 0.5 kg
2 min. approx. 1.0 kg

For further details, read the information provided by the equipment manufacturer.

Supporting measures for masonry work injection:
- One silicification treatment as vertical surface treatment from the floor slab up to approx. 20 cm above the row of boreholes, using Remmers Preparatory Mortar
- Remmers Special Restoration Render

Substrate preparation: Remove old render at least 80 cm above the visible moisture edge. Chase out damaged joints 2 cm deep. Fill open joints with Remmers Undercoat Render. Coat wall surfaces up to 30 cm above the row of boreholes with Remmers Sulfatex Grout in the Remmers Kiesol System (mineral waterproofing with deep protection).
Below the horizontal barrier, separate the render in the floor connection by a joint and, depending on requirements, waterproof the floor surface. b) Subsequent basement waterproofing from the interior with a silicification treatment using Kiesol diluted 1:1 with water and Remmers Sulfatex Grout: Preparation of the substrate: All substrates must be sound, load-bearing and free of substances that could interfere with adhesion and loose or soft materials. Basement masonry work, interior: Remove old render at least 80 cm above the visible moisture edge. Remove old coatings and clean the entire surface, e.g. by mist blasting (Rotec), also mechanically on small areas. Indentations must be filled and masonry work made of cavity blocks with a very coarse surface texture (e.g. basement building blocks, slag blocks) must always be rendered first (Remmers Undercoat Render or Remmers Waterproofing Filler) and waterproofed after the render has set. Interior waterproofing is executed continuously. For this, separate interior dividing walls from exterior walls approx. the width of a block as far up as the render was removed. In the floor-wall connection, chisel out screed approx. 20 cm wide, or, in the case of leaking basement slabs, remove screed completely. Partial leaking areas in the masonry work, e.g. floor connection joints, horizontal joints with barrier membrane, are pre-waterproofed using Kiesol and Remmers Rapid Hardener and closed with Remmers Waterproofing Filler. Fill cracks leading water, construction joints especially in concrete with Remmers Injection Resin PUR or inject through packers. Pre-wetting the substrate: Pre-wetting is carried out, depending on the moisture content and absorption capacity of the substrate. Highly absorbent masonry work (e.g. dry sand-lime brick) should be pre-wet several times prior to treating!

The waterproofing should only be applied to matt damp substrates and never to shiny wet substrates. Directions: For subsequent surface waterproofing with deep protection, diluted Kiesol is used in combination with Sulfatex Grout, applying as a silicification treatment, wet-on-wet: Spray on Kiesol diluted 1:1 with water, covering the entire matt damp substrate. Spray only enough that it does not run down. After a waiting time of at least 15 minutes, brush on Sulfatex Grout over the entire surface in a grouting procedure. The grout should be applied in a minimum layer thickness of 1 mm. After this first silicification treatment, wait 20 minutes (depending on substrate) before applying a second coat of grout. For standing seepage water or water pressure, apply three silicification treatments using Sulfatex Grout. The minimum application rate for the grout is 2.0 kg/m² (> 1 mm thick layer) per coat. The total thickness of the layer of grout should not exceed 5 mm at any one place. Since future water loads may change, we recommend that three silicification treatments are always applied. Place a sealing cove in the floorwall connection made of Remmers Repellent Mortar or Remmers Waterproofing Filler. Then throw on Remmers Preparatory Mortar onto the last layer of grout, covering the entire surface. If the spritz is not applied the same day, apply another layer of Sulfatex Grout without using Kiesol and while fresh, throw on Preparatory Mortar. After setting, at the earliest after 3 days, apply render, using Remmers Special Restoration Render Restoration or Fast Restoration Render. Separate the render on the wall from the floor with a joint at least 1 cm wide. Never apply gypsum or lime render.

II. Waterproofing new buildings: see technical datasheet.

Application rate
Silicification treatment: 0.1 kg/m² Kiesol and 1.6 kg/m² grout
Waterproofing new buildings: 0.1 to 0.3 kg/m² Kiesol
Special applications: 0.1 to 0.3 kg/m² Kiesol

For application rates in detail, see Bills of Quantities and the latest Technical Data Sheets for the above named system products.

Kiesol (10 kg)

Mon, 13 Jun 2016 18:42:09 +0000

Contents: 10 kg

Range of use

Kiesol is a liquid combination product made of water repelling silicic acid compounds
Water repelling, capillary narrowing, deep protection for waterproofing damp masonry work
Protection against capillary rising damp through injection with Kiesol in a borehole procedure
Diffusion open barrier zone (deep protection) against the effect of moisture from behind
Improved adhesion by priming, diluted 1:1 with water
Strengthens the substrate and increases chemical resistance through silicification
Faster working operations through silicification treatments with waterproofing grouts (system waterproofing in one day)
As a solvent-free, highly concentrated system component, Kiesol is environment-friendly and is thus also suitable for indoor applications
Suppresses capillary water absorption according to WTA, tested up to a degree of 80% moisture penetration by injecting under gravity.

Kiesol (30 kg)

Mon, 13 Jun 2016 18:14:43 +0000

Contents: 30 kg

Range of use

Kiesol is a liquid combination product made of water repelling silicic acid compounds
Water repelling, capillary narrowing, deep protection for waterproofing damp masonry work
Protection against capillary rising damp through injection with Kiesol in a borehole procedure
Diffusion open barrier zone (deep protection) against the effect of moisture from behind
Improved adhesion by priming, diluted 1:1 with water
Strengthens the substrate and increases chemical resistance through silicification
Faster working operations through silicification treatments with waterproofing grouts (system waterproofing in one day)
As a solvent-free, highly concentrated system component, Kiesol is environment-friendly and is thus also suitable for indoor applications
Suppresses capillary water absorption according to WTA, tested up to a degree of 80% moisture penetration by injecting under gravity.